CD-IR-WP
FIXTURE EXTERNAL ON/OFF PIR SENSOR WITH IP65
- 30 minutes maximum time delay setting
- Detection radius of up to 8 metres
- Remote control setup
- 450W rated load
- 2 year warranty
- IP65 rated
PRODUCT INFORMATION
PRODUCT DESCRIPTION
The miniature PIR (passive infrared) presence detector provides automatic control of lighting loads. It is specifically designed for mounting onto a batten style luminaire. The detector will switch incandescent, fluorescent, compact fluorescent and LED lighting.
The unit detects movement using PIR sensor and turns the load on. When an area load is no longer occupied, the load will switch off after 30 minutes. A selection of fixing washers are supplied to aid fixing to a variety of luminaires.
TECHNICAL DATA
Power Source: 220 – 240Vac
Frequency: 50/60Hz
Humidity: 5 – 95% non-condensing
IP Rating: IP65
Material: Flame retardant ABS/PC
Maximum Switching Load: Fluorescent/LED: 250W | Resistive: 450W
Power Consumption: On: 799mW | Off: 807mW
Supply Voltage: 220-240V
Temperature: -10°C
Mounting Height: up to 7 metres
INSTALLATION GUIDE
Install the occupancy sensor within the mounting height rating to ensure full function potential. Due to its sensitivity to body heat, the sensor is also sensitive to rapid changes in temperature within its detection range. Avoid mounting the sensor close to heating or cooling systems. The recommended distance from these HVAC systems is 1.5 meters. Movement in front of hot backgrounds may not be detected.
There must be no obstructions from the sensor to the occupants as the sensor is a line-of-sight device. The further the distance, the larger the blind spots. Keep sensors close to the desired detection zone and use more sensors to cover the targeted area efficiently.
High levels of vibration may cause false triggering. Avoid placing sensors close to heavy duty motors (lift motors, aircon duct systems or heavy-duty fans) that may cause the ceiling to vibrate.
