UPS SYSTEMS

INTRODUCTION

The wide variety of Cosine Developments ES products are a rising product range unrivalled within the marketplace. It is the primary choice for emergency lighting applications where full brightness is required for long durations of time. The lower wattage range (10W to 85W) are most commonly used to power LED panels and any lighting system off of battery backup. The high wattage ES range (100W to 200W) are most commonly used on high power LED Hi-bays and LED Floods.

Our ES product range covers vast wattage ratings, ensuring that we have covered all possible customer requirements – wattages are as follows; ES10W, 25W, 40W, 85W, 100W, 125W, 150W and 200W.  The output voltage on the ES10W, 25W, 40W and 85W can be altered to either 230VAC (modified sine wave) or 300VDC – depending on the customers requirement. The ES100W, ES125W, 150W and 200W on the other hand are set at a 230VAC modified sine-wave output. 

Upon ordering ES units ranging from 10W to 85W, it is required that the customer states what lamp or load they will be using. The decision will then be made as to whether we should supply a DC output or AC, as the technology within some lighting contains active intelligent circuitry, this can conflict with an AC modified output. The decision that will be made leads to the conversion of the output of these ES inverters from AC to DC which negates that conflict – allowing for perfect operation.

The ES10W, 25W, 40W and 85W may be used with either lead-acid or ni-cad battery packs. The ES100W to 200W can only be used with lead-acid batteries.

UPS SYSTEMS PRODUCTS

ES10Wdc

EMERGENCY KIT FOR 230Vac LAMPS UP TO 10W

The ES-10W supplies 100% light output in emergency operation for most 230V LED or ES lamps up to 10W. Please note, the lamp must be specified prior to ordering this product to confirm its compatibility with the load-active circuitry varies from each brand, which could interfere with this emergency product…

ES10Wac

EMERGENCY KIT FOR 230Vac LAMPS UP TO 10W

The ES-10W provides emergency operation for most 230V LED, ES lamp or any 230Vac device up to 10W. Lamps will deliver 100% light output in emergency mode…

ES CONVERSION KIT

UPS SYSTEM FOR 230Vac DEVICES OR LAMPS UP TO 25W

The ES Conversion Kit is now available with a plastic enclosure and end caps for easy and safe installations. The lithium-ion battery will provide a minimum of 1- hour emergency for 230Vac loads up to 25-watts…

ES25Wac | ES25Wdc

UPS SYSTEM FOR 230V DEVICES OR LAMPS UP TO 25W

The ES-25W supplies 100% light output in emergency operation for most 230V LED or ES lamps up to 25W…

ES40W

UPS SYTEM FOR 230V DEVICES OR LAMPS UP TO 40W

The ES-40W supplies 100% light output in emergency operation for most 230V LED or ES lamps up to 40W…

ES85W

UPS SYSTEM FOR ANY 230Vac DEVICES OR LAMPS UP TO 85W

The ES-85W supplies 100% light output in emergency operation for most 230V LED or ES lamps up to 85W…

ES100W | ES125W PACK

UPS SYSTEM FOR ANY 230Vac DEVICE OR LAMPS UP TO 100W | 125W

The ES-100W | 125W supplies 100% light output in emergency operation for most 230V LED or ES lamps up to 100W | 125W…

ES150W | ES200W PACK

UPS SYSTEM FOR ANY 230Vac DEVICE OR LAMPS UP TO 150W | 200W

The ES-150W | 200W supplies 100% light output in emergency operation for most 230V LED or ES lamps up to 150W | 200W…

SWITCHED LIVE ADAPTER

UPS SYSTEM FOR ANY 230Vac DEVICE OR LAMPS

The Switch Live Adapter is a device that allows you to switch off a load when there is only an un-switched live available. The most common use of the Switch live adapter comes when an Uninterruptable Power Supply is being used…

css.php