Smart LED Emergency Pack

A DALI controllable LED emergency kit
> 5 year warranty on inverter
> Provides emergency power for any constant current driven LED
> One hour emergency duration
> Controllable via the DALI link
> Configurable via most DALI BMS systems

[siteorigin_widget class=”SiteOrigin_Widget_Image_Widget”][/siteorigin_widget]

The SMART LED EMERGENCY PACK is a DALI compatible digitally addressable lighting interface emergency control unit. The SMART LED provides emergency light output for one hour with any constant current driven 10-100V LED string. There are no functional differences from ordinary emergency lighting control units, so no special training is required for installation. The unit complies with the Digitally Addressable Lighting Interface (DALI) Standard IEC 62386 and is therefore compatible with all international interfaces. Its bi-directional bus uses standard protocol and can therefore be addressed by all reputable bridges. The emergency function and system status can be addressed from a computer to perform tests to check system integrity.
The SMART LED EMERGENCY PACK uses a standard 7.2V Nicad battery and complies with SANS 1464-22 in terms of emergency performance, electrical safety and battery charging.

The LED SMART EMERGENCY PACK has 2 types of test modes:
> A short function test that checks the functionality of the unit and checks the lamp and battery, the test lasts for 1 minute and 50 seconds.
> A long duration test, which lasts for 40 minutes and will help remove battery memory. This test also checks the lamp and battery for faults.

When performing a test and a fault is detected, the unit will end the test and record the fault, it will only
report the fault once it is queried with various commands.

[siteorigin_widget class=”SiteOrigin_Widget_Image_Widget”][/siteorigin_widget]