TLX STBY Emergency kit with standby feature
> 5 year warranty on inverter
> Remote standby feature to save battery power
> Emergency lighting kit for fluorescent lamps from 6 to 65 Watts
> 20% emergency lighting for one or three hours
> Maintained or non-maintained operation
The TLX_STBY/E emergency control unit has a standby inhibit function to conserve battery power during a power failure. This feature is especially useful for use in sub-stations when a power failure may cause emergency lighting battery depletion before personnel arrive on site. Many emergency luminaries can be connected to the same standby switch. The maximum distance between the luminaire and the standby switch is 100 meters; more than adequate for most installations. The unit is available in both one hour and three hour duration versions. Light output and lamp types are identical to those of the standard TLX control unit (higher emergency light output versions are available upon request). Five pole relay switching ensures electronic ballast protection and safety.
The unit complies with BS EN 60598-2-22, BS EN 60924 and SABS 1464: Part 22. Either maintained or non-
maintained mode can be used. A safety start circuit is provided that prevents emergency operation until mains is connected. This enables installation without disconnecting or depleting the batteries. A red light indicates that the batteries are being charged. The case material has excellent high heat resistance and impact strength properties and includes a wiring connection diagram.
